February 14, 2023

1. There is no downtime for water availability A typical drain-down inspection involves the removal of a water tank while the inspection team enters the bowl. This necessitates the waste of water that would otherwise be consumed by local residents. It also necessitates providing residents with an alternate source of water (continuous pumping or a temporary water source) and disinfecting the tank for AWWA compliance before returning it to service. The water tank can be kept operational with a ROV. 2. They help conserve water A tank inspection with a dive crew frequently entails removing some of the water for sediment removal or completely removing the water for a drain-down inspection. Water removal is both costly and time-consuming. ROVs can operate inside a tank no matter how much or how little water remains in it. 3. ROVs are cost-effective As previously stated, there is no need to hire an expensive dive team or remove tank water. When using an ROV instead of a dive team to inspect an elevated water storage tank, savings of up to 50% can be realized. When your consultant owns its own ROV equipment, you can save a lot of money. 4. ROV inspections are more timely For cities with multiple tanks, using an ROV allows them to inspect up to three tanks in a single day. Using a dive team limits the number of inspections to one per day. Furthermore, while waiting for the dive team takes time, so does waiting for their reports. 5. They allow for peace of mind A good consulting team that uses an ROV consists of NACE International (NACE) and American Welding Society (AWS) certified personnel who have been trained in providing water tower inspection services. Bringing it all together Utility operations include water tank inspections. Regular inspections ensure that the tanks are clean and operating properly, and a consistent inspection schedule allows for easy, ongoing maintenance, which saves money over time. The AWWA suggests inspecting every three to five years. Traditional visual inspections frequently necessitate the use of a separate dive team, which is both expensive and time-consuming. Remotely operated vehicles (ROVs) are assisting in bridging that gap. How Are ROVs Used For Water Storage Tank Inspections? ROVs are small, remote-controlled watercraft devices equipped with cameras and sensors that transmit visual, underwater imagery to monitor screens. Water tank inspection services have used these tiny robotic vehicles to make the task of inspecting potable water storage vessels faster, easier, and more accurate, all without the need to drain the tank. ROVs allow water tank maintenance services to get a better look inside the tank while it is full to determine its condition without the need for dangerous diving inspections that require permits. They are now used to perform visual inspections, collect specimen samples from large tanks, and perform other tasks, making it much easier for tank owners to comply with water tank maintenance and routine tank inspections. ROVs Make Water Tank Maintenance Easier Prior to the use of ROVs, water tank inspection services were required to drain these massive vessels more frequently in order to properly inspect and maintain their interiors. ROVs allow for nearly the same accuracy during inspections while not taking tanks offline for days or weeks at a time and sacrificing their contents. While it may still be necessary to take tanks offline and drain them to perform certain types of water tank maintenance, the decision can be made more easily using an underwater ROV. ROV inspections are a popular choice for owners of large water storage vessels because these remote-controlled, camera-carrying robotic devices make water tank maintenance and inspections faster, easier, safer, and less expensive. We offer tried and tested services in Crockett, Grapeland, Kennard, Latexo, Lovelady, Ratcliff, HOUSTON, TEXAS.  We also offer tried and tested services in Longbeach, and cities, towns, suburbs, localities, and places close to Long Beach such as Lakewood, Rossmoor, Lincoln Village, Seal Beach, Hawaiian Gardens, Los Alamitos, Cypress, Bellflower, Carson, La Palma, Paramount, Cerritos, East Compton, West Carson, Compton, Norwalk, Stanton, Westminster, Lomita, Downey, Lynwood, Rolling Hills Estates, Cudahy, CALIFORNIA. Our friendly and experienced customer service team is here to help you! Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com 1305 W 11th St #4087 Houston, TX 77008 USA 3711 Long Beach blvd Suite 4057 4th Floor # 1079 Long Beach, CA 90807 USA

When purchasing a water storage tank, the configuration and selection process is frequently required early in the project design process. The timing of construction and overall project costs will be considered when applying for and securing any available funding. Because many municipalities have a single source of water storage, tank design is critical in meeting a community’s current and future needs. An assessment of community demands for current and anticipated water supply, site conditions, pressure requirements, long-term maintenance, ease of access, and overall costs are some of the key details required for the final selection of the tank configuration process. This equipment’s technology and manufacturing process distinguish it from painted steel or concrete structures. Uncontrolled variables are eliminated when using the factory manufacturing process, as opposed to field-manufactured products such as painted steel or concrete tanks. Worker experience and extreme climatic environmental conditions, which have been shown to have a significant impact on in-field manufactured products, have a negligible impact on the glassing process. Furthermore, because the tanks are manufactured in the factory and only the components need to be assembled in the field, they can be erected all year. All storage tanks are coated. Coatings available today are made of paint, concrete, or glass. The impermeability and properties of glass are advantageous. The glass coating process starts with glass frit, which is combined with other minerals and water to form a liquid slurry. This glass slurry is then robotically sprayed in precise amounts and thicknesses onto steel sheet panels that have already been cut and rolled, punched, grit-blasted, and cleaned. Panels are heated to 1500° F in a furnace. This heat melts the silica glass slip into the grit-blasted steel surface. This completes both the mechanical and chemical bonds between the steel and the silica glass. Different coatings for other tanks rely on a mechanical bond between the coating and the underlying material. The chemical bond strength is many times that of the conventional mechanical bond and prevents undercutting of the coating, which could allow corrosion to spread on the primary steel material. Imagine a scratch on your car to better understand this benefit. Because that coating only has a mechanical bond, corrosion will occur if the steel is exposed. If left untreated, the corrosion will spread and creep beneath the surrounding painted surface, jeopardizing the remaining coating. This is frequently seen as raised bubbles, spreading rust, and weakened substrate. The chemical bond of the glass-fused-to-steel coating prevents corrosion from spreading if the coating is compromised. When erecting a glass-coated bolted steel storage tank, a jacking system is used. The tank’s top ring is built on the jacks after the starter sheet (bottom ring) is either embedded in the concrete foundation or constructed using a glass-fused-to-steel floor design. The tank’s roof is then erected, and the ring and roof are jacked up. Each additional ring is then bolted together beneath the top ring and a urethane sealant is applied between the seams. Tanks are built from the top down, which allows for a safer and faster construction process. The erection process is typically completed in a week or two, saving the owner money if prevailing wages for onsite labor are used. Furthermore, the manufacturer requires all building crews to be factory-trained and certified in the erection process to ensure quality control in the field. Tanks made of glass-coated bolted steel have a long lifespan. Because glass coating is permanent, it never needs to be painted. Glass-coated tanks are frequently used in areas where a long-term pleasing visual appearance is desired. Budgeted funds that could be used to repaint a painted tank or repair aged concrete can be saved and redirected to other municipal projects. This product’s bolted design and erection provide flexibility. Large staging areas required when a product is manufactured onsite are eliminated because manufacturing is completed in a factory. The tank’s construction can usually be completed with a cleared area of 6 to 10 feet around the tank’s diameter. This small footprint can save thousands of dollars on the overall project, in addition to the cost of the tank. The panels themselves are hand-carried and easily assembled without cranes or special equipment, allowing this tank to be installed in many locations where other tank types would be impossible. The glass-coated bolted tank design allows for vertical expansion. If a community or industry expands and more capacity is required, the tanks’ jacking process allows the end user to gain capacity quickly and affordably. The factory-trained professional construction crew removes the bottom ring from the original starter sheet, jacks up the tank, and adds the number of rings required to achieve the new capacity. When these tanks are expanded, there is no visible difference between the original and new panels. Our friendly and experienced customer service team can help you more about the proper installation of a new water tank construction. We offer tried and tested services around Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167.

Water storage tanks must be inspected and cleaned on a regular basis to help maintain good water quality in the distribution system and to help extend the tank’s life. Regular tank inspections can also help to identify minor issues before they become major issues, which can cause health problems and lead to costly repairs or premature tank failure. Tanks that are not cleaned on a regular basis can cause contamination events that are harmful to human health or contribute to aesthetic complaints. There are two basic types of inspection: How often should a water system inspect and clean storage tanks? The interval between inspections and cleanings can vary depending on the type of tank and the quality of the water. A water storage tank should be inspected at least every five years, or more frequently if required by the state. Cleaning and repairs should be addressed based on the tank inspection findings. Additional inspections are encouraged between maintenance intervals. The majority of states do not certify tank inspectors. Before hiring any inspector, request a copy of a standard report that corresponds to the tank in question. Check to make sure the report is acceptable to the state regulatory agency. With the upcoming 2017 water quality rules, it is best to hire only inspectors who can provide in-service temperature readings to identify stratification. Circulation Circulation is essential for preventing stratification of water within a tank. As an aside, freezing of potable storage tanks should be avoided with proper circulation and water turnover. Water is typically added to and drawn from the bottom of the water container via inlet and outlet piping. The water level rises when the fill rate exceeds the draw rate. When the draw rate exceeds the fill rate, the water level falls. If the fill and draw rates remain constant, the system is drawing the water that was just added. As a result of the lack of circulation, the water at the top of the container becomes stratified and stagnant. Furthermore, the chlorine that remains in stagnant water can deplete, allowing microbial growth as well as the development of tastes and odors. Adding mixers to your tank to help with these issues is a common and cost-effective way to prevent this. TESTING FOR CONTAMINANTS Bacteriological testing must be completed before the tank can be returned to service, regardless of the method used. The presence of coliform bacteria in sample testing after disinfection indicates the presence of potentially harmful contaminants in the water. Water analysis can determine whether or not microbes and bacteria in a water sample pose a risk to public health. Other contaminants, on the other hand, are visible from within the tank. Dirt, mud, sand, rust, and other elements or particles can accumulate at the bottom of a tank, covering an otherwise pristine white tank bottom with inches of sediment. If too much sediment settles in the pipes, the outlet pipes can also become clogged. To discuss any of the concepts described here in more detail, our friendly and experienced customer service team can help. We offer tried and tested services around Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com

Elevated Water Storage Tanks Elevated water storage tanks are used to store water for fire protection as well as potable drinking water in a specific area or community. Elevated tanks allow gravity to produce consistent water pressure throughout the system. Elevated water tanks can be designed in a variety of shapes, sizes, and materials based on the intended application and distribution area needs. Here are four proven advantages of placing Elevated Water Storage Tanks: 1. It creates more water pressure. A water storage tank’s elevated position allows it to deliver water with greater force. It’s simple physics: water flows towards gravitational force, so the higher the pressure, the greater the height. Numerous studies show that if a unit is placed more than a hundred feet above the ground, there is a significant increase of around.43 pounds per square inch per foot. 2. It eliminates the expense and installation of a pump. A water pump is usually not required for the average household that uses a stainless steel water storage tank for human consumption. If the unit is installed at a sufficient height above the house’s plumbing, it may generate enough pressure. Furthermore, elevating the unit will most likely provide adequate pressure for a water tank that only serves the garden and other external uses. Simply put, not using a pump will save you a lot of money. 3. It prevents contamination. Tanks are also installed in elevated locations for practical reasons. This prevents extreme sediments and other foreign objects from entering the system. You should be aware that the longer sediment remains in a water tank, the more likely contamination and pathogenic growth will occur. 4. It provides convenient access for repairs. Any fixture installed above ground allows for much easier routine maintenance access. Leaks will be relatively easy to detect and repair if they occur. This is also why most tank providers, such as Firstank Philippines, provide a free ladder with the unit. It is not required to keep your water storage tanks on the highest level of your home or building. They can even be installed on the ground floor. However, making water flow through the pipelines will almost certainly necessitate outside assistance. Choosing An Elevated Water Tank It is critical to consider the height, construction, capacity, size and shape, and cold protection requirements when selecting the best-elevated water tank for your application. The proper elevated water tank installation will ensure consistent and efficient water flow throughout the distribution area. Height The height of an elevated water storage tank affects community water pressure. Towers should always provide a minimum of 20 psi of water pressure to distribution system users, though standard pressure is much higher—typically between 60 and 70 psi. The elevated tank’s height must be sufficient to maintain a constant minimum pressure at all points within the distribution area. Size and Capacity Consider the tank’s storage capacity and expected usage when selecting a water storage tower. Water usage projections, including community growth and emergency usage, are required to ensure that the elevated water storage tank has adequate capacity. Design and Construction Engineers must consider the intended use, water quality, pressure requirements, and environmental impact when determining the proper design and materials for a water tank. The material selection and design elements will be influenced by the area’s soil quality and consistency, potential seismic activity, high winds, and extreme temperatures. Consider the installation site and how field-erected tanks may pose difficulties. Importance of Cold Resistance An elevated water tank is vulnerable to freezing in subzero temperatures, potentially leaving the community without a reliable water source. To prevent freezing, a variety of water tank heating methods, such as gravity circulation, steam coils, and/or direct steam discharge, can be used. Elevated Water Storage Tank Applications In addition to municipal water storage, elevated storage tanks offer a reliable solution for a variety of other applications, including: Elevated Water Storage Tank Maintenance Regular maintenance of elevated storage tanks is critical to ensuring optimal tank operation and water quality. The AWWA industry standards and most federal, state, and local regulations recommend inspecting water tanks every 3-5 years. Inspectors inspect the coating, joints, fixtures, surfaces, and foundation of the tank to ensure that everything is stable and in good working order. Any flaws or irregularities discovered during the inspection should be corrected as soon as possible to avoid worsening issues such as leakage, pressure loss, and water contamination. To avoid sediment buildup and potential contamination from loose, leaking, or damaged tank components, test your water quality on a regular basis. If you want the service of a truly local business, then look no further. Our friendly and experienced customer service team is here to help you! We offer tried and tested services in Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167.

Due to insurance company requirements and increased government regulations, fire storage tanks are in high demand. They are used in commercial buildings, residential properties, municipalities, and even as a backup water supply. The tank’s specifications, including its size and capacity, are determined by the site or building design. It can be installed underground, above ground, or inside new or existing structures. Fire water storage tanks provide a dedicated source of water to support fire sprinkler and suppression systems. In areas where municipal water supplies are insufficient and there is insufficient pressure and volume to extinguish the fire, water storage tanks are a must-have to keep large amounts of water in case of a fire. What exactly is a Fire Water Tank? The name should be self-explanatory: it is a separate water storage tank installed on top or below the roof to supply water to sprinklers or hoses in the event of a fire. When water is needed, the tank makes it readily available. Due to an increase in fire emergency statistics in the United States, these tanks are becoming increasingly important as alternative water sources become scarce. The fire water roof tanks can be custom designed to meet the needs of the owner, the size of the house, or the environmental conditions. Engineers with extensive industry experience can create custom designs that are tailored to a specific business. The benefits of these tanks cannot be overlooked in this modern era of electrical appliances and other flammable materials capable of causing fire anytime. Benefits of the Fire Water Tanks Installing firefighting water tanks on your property in regional, rural, or local fire areas allows firefighters to quickly replenish their tankers. They can then return to putting out the fire and preventing further damage to life and property. Underwater inspections eliminate the need for a tank drain. They ensure that sprinkler systems remain operational throughout, implying that fire safety measures are not compromised. Sprinkler tank renovation can include relining, which provides a guaranteed solution for at least another ten years. If you’re looking for water tank inspection and cleaning services to serve your off-grid property in the sustainable way you’re after, American Tanks will likely be the right fit for you. Our friendly and experienced customer service team is here to help you! We offer tried and tested services in Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167.

The selection of the correct size and type of potable water storage tank, like any truly important decision, is critical so that when the need arises, there are no surprises as you begin to use the reserves you have stored for your family and their daily needs. The ability to keep the water clean and ready to use is an important feature of a quality water storage tank. This, for the most part, means that there needs to be a liner or bladder keeping the water from ever touching the steel or that steel be coated with a material that will do the same thing, such as Stainless Steel or Glass-Lined Steel. Potable water is water that is safe to drink or use for humans because it is not contaminated or polluted. Water is frequently stored in water tanks in homes, buildings, and businesses, with various types of water tanks and tank liners that keep potable water safe to use. Let’s take a look at the advantages of a water liner for your water tank and business, as well as how it keeps potable water safe to drink. Benefits of Water Filters for Potable Water The majority of potable water is obtained from taps or faucets at work or at home, as mineral water from underground springs or wells. Purified water must be stored in secure tanks in your home or in the ground, and water tank filters are frequently used to keep bacteria and chemicals at bay. Water liners are required for most water tanks in your home or on your property to protect the water. Without them, your water may be unsafe to drink or use. They prevent your water tank from rusting and leaking, as well as harmful bacteria from entering your tank. They are intended for home water tanks as well as underground storage tanks or piping. According to the federal government, underground storage tanks are any tank or system of tanks connected by underground piping. 10% of their joint volume must be found beneath the ground. A liner can help the tank withstand the elements of rain, sun, and wind when it is outdoors on the ground or above. Potable water liners should be made of a material that is not affected by UV rays. Potable water storage is a critical issue for human health. Water is a basic requirement for all living things; it is critical to keep the stored water pure and clean. Water leaking occurs as a result of underground water pressure if potable water tanks are not waterproofed. Underground water and soluble salts will infiltrate and cause structural damage if a crack forms. Overall, potable water should be stored in safe water tanks with water tank liners that are designed to protect potable water and not leach chemicals into the water. Those in the industry must provide safe liners for potable water tanks. Which Properties Are Required For The Materials Used For Potable Water Tank Waterproofing? To process and store potable water, facilities must be completely clean and waterproof. Potable water is stored in specially designed-reservoirs and tanks. These storages must be watertight, clean, safe, and health-safe. Typical potable water tanks provide below features: When designing the waterproofing for potable water tanks, pH value, mineral content, water temperature, and water treatment must all be considered. Waterproofing materials used in potable water tanks must not only be waterproof but also safe for human consumption. As a result, especially suitable potable water tank materials must be chosen. To discuss any of the concepts described here in more detail, our friendly and experienced customer service team can help. We offer tried and tested services around Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com

What is a Fire Water Tank? In the event of a fire, a fire water tank stores water that is pumped directly into a sprinkler system. These tanks provide an extremely valuable source of water, which is critical in the protection of people, products, and property. Advantages Water storage tanks are used to protect against fire in commercial and industrial settings. Fire can occur at any time for a variety of reasons. It is critical to protect human life and property from the destructive effects of fires. In the event of a fire, readily available water is extremely useful. Custom water tanks can be installed to meet the size and fire safety requirements of the building. Fires can occur at any time for a variety of reasons, and sometimes without warning. As a result, it is critical to protect human life and property from the destructive effects of fires. In the event of a fire, readily available water is extremely useful. One way of ensuring access to water to safeguard against fires is with a fire water tank. Most water tank manufacturers are working on systems that will allow them to seamlessly integrate the water storage tank with their existing fire protection system. As a result, there is no need to install additional systems. This has the following advantages: Companies and individuals are required by law to make certain fire safety provisions. A critical component of this is having enough water on hand in case of an emergency. If a fire breaks out, it is critical that water is always available. Fire tanks are not affected by water pipeline damage or water shortages, so businesses will always have access to water. Fire tanks provide an immediate response to fires, protecting property, products, and people. In the event of a disaster, these tanks provide immediate assistance. It protects both property and lives. Water tanks can be used by businesses looking to integrate best practices into their existing processes. When Do You Need a Fire Water Tank? When installing a fire sprinkler system, a fire water tank is required. In general, two fire water tanks are required on the property so that if one is being serviced, the other remains operational. When it comes to insurance, many companies require a fire-water protection system on the premises. Safe water storage is essential for both residential and commercial applications. In residential applications, rainwater is collected and used to water lawns and gardens. Water storage is required in many commercial processes, such as farming irrigation, livestock care, and cleaning. We offer tried and tested services in Crockett, Grapeland, Kennard, Latexo, Lovelady, Ratcliff, HOUSTON, TEXAS.  We also offer tried and tested services in Longbeach, and cities, towns, suburbs, localities, and places close to Long Beach such as Lakewood, Rossmoor, Lincoln Village, Seal Beach, Hawaiian Gardens, Los Alamitos, Cypress, Bellflower, Carson, La Palma, Paramount, Cerritos, East Compton, West Carson, Compton, Norwalk, Stanton, Westminster, Lomita, Downey, Lynwood, Rolling Hills Estates, Cudahy, CALIFORNIA. Our friendly and experienced customer service team is here to help you! Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com 1305 W 11th St #4087 Houston, TX 77008 USA 3711 Long Beach blvd Suite 4057 4th Floor # 1079 Long Beach, CA 90807 USA

Remotely operated vehicles (ROVs) are altering the way potable water tank inspections are thought about, planned, and carried out. The challenges of inspecting potable water tanks Potable water tanks are used in a variety of industries around the world, including oil and gas platforms and onshore facilities. It is critical that the central supply of water remains clean and safe for industrial applications as well as personal use such as cooking, showering, and drinking. Managing this, on the other hand, can be a daunting task. Currently, the most common method of performing inspections is to drain the tank completely and arrange for personnel to perform close-up inspections, which poses a confined space hazard. Tanks are then cleaned or treated as needed before being refilled. This method can shut down the tank for up to three days, or longer if remedial treatment is needed. The risks of neglecting the water tank inspections A water tank that has not been inspected within the recommended timeframes may contain a variety of contaminants, including microbial, chemical, hydrocarbon-based, and excessive debris and or sediment. These can then endanger both human health and the tank’s integrity. Legionella formation is one of the most serious of these risks. Legionnaires’ disease is a serious type of pneumonia (lung infection) caused by Legionella bacteria. Legionella bacteria can also cause Pontiac fever, a less serious illness. Corrosion is also a serious issue in terms of tank integrity and Legionella growth. Because iron is an important food source for Legionella, corroded tanks have a higher incidence of positive Legionella results. ROVs and their role in tank inspection ROVs have the potential to improve traditional water tank inspection methods. The following advantages of using ROVs over traditional methods have been discovered by American Tanks: • Using an ROV eliminates the dangers of confined space entry, which is required. Permits, planning, and paperwork are all part of the process. • ROV inspections do not necessitate the emptying or refilling of water tanks. • Using an ROV shortens the time-consuming recommissioning process. Tank super chlorination is required prior to bringing the tank back after a manned entry. online. This is not necessary if an appropriately deployed ROV is used. • If remedial work is required following an ROV inspection, the footage can be saved. and drawn upon, which can help to inform future planning. In the long run, this can save time and money. • ROV footage provides the detailed, close-up views required to inspect a tank’s interior internal state. • Some ROVs have advanced features, such as arms that can collect samples from inside a tank and measure wall thickness. Regardless of how you choose to conduct your tank inspections, it is critical that your methods adhere to best practices and are established with longevity and the safety of your systems and people in mind. Contact our teams to learn more about the potential benefits of tank inspection services and for advice on how to use ROVs. Many of the spaces we’ve been hired to clean have never been cleaned because they’re too small, too tight, or too dangerous. Our robots can not only fit in places where humans cannot, but they can also withstand heat, chemicals, and other environmental conditions that would endanger a live diver. We can generate detailed inspections and assessments using technology that would otherwise be impossible to obtain. We can provide more accurate proposals and do a better job of cleaning the spaces because we do a better job of thoroughly evaluating what’s inside a tower or storage tank. As with anything else in life, having the right information from the start makes it easier to complete a task thoroughly and professionally. This makes things safer, faster, and (often) less expensive for our clients. We offer tried and tested services in Crockett, Grapeland, Kennard, Latexo, Lovelady, Ratcliff, HOUSTON, TEXAS.  We also offer tried and tested services in Longbeach, and cities, towns, suburbs, localities, and places close to Long Beach such as Lakewood, Rossmoor, Lincoln Village, Seal Beach, Hawaiian Gardens, Los Alamitos, Cypress, Bellflower, Carson, La Palma, Paramount, Cerritos, East Compton, West Carson, Compton, Norwalk, Stanton, Westminster, Lomita, Downey, Lynwood, Rolling Hills Estates, Cudahy, CALIFORNIA. Our friendly and experienced customer service team is here to help you! Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com 1305 W 11th St #4087 Houston, TX 77008 USA 3711 Long Beach blvd Suite 4057 4th Floor # 1079 Long Beach, CA 90807 USA

Tank inspections using underwater drones can improve security, speed, effectiveness, and overall response capacity. The impact of overcoming the traditional challenges ports face in infrastructure and asset inspection has been so significant that they have become a primary tool for tank inspections. Drones can collect a wide range of data from difficult-to-reach locations, allowing us to collect accurate data quickly and safely, inform decisions, and address potential issues before they occur. It also enables us to more effectively plan maintenance, virtually eliminate downtime, and extend the lifecycle of the port’s assets. How does the underwater drone work? Tank inspections using underwater drones can improve security, speed, effectiveness, and overall response capacity. The impact on overcoming the traditional challenges ports face in infrastructure and asset inspection has been so significant that they have become a primary tool for tank inspections. Drones can collect a wide range of data from difficult-to-reach locations, allowing us to collect accurate data quickly and safely, inform decisions, and address potential issues before they occur. It also enables us to more effectively plan maintenance, virtually eliminate downtime, and extend the lifecycle of the port’s assets. Is it cost-effective to produce this type of drone? Underwater drones have proven to be a cost-effective way to ensure the tank’s durability and cleanliness. By eliminating the need for manual inspection, insurance costs for both inspectors and workers are reduced. However, one of the major benefits of using underwater drones for asset inspection is that it provides an incentive to conduct preventative inspections rather than only conducting inspections when required by regulations or when absolutely necessary due to the potential cost to business and the financial implications. CONFINED SPACES Indoor inspections, such as tank inspections, present numerous challenges. Inside a tank, the atmosphere is dark and hot, and inspectors may be exposed to dangerous gases that are not detectable by smell. Inspections are typically carried out by a team of inspectors who must climb ropes without the use of safety nets. If ropes cannot be used, scaffolding must be built within the space. This is a time-consuming, costly, and risky project. Underwater drone technology allows inspectors to complete these inspections in a fraction of the time while reducing health risks and financial costs. UNDERWATER Drones can also be used to perform underwater visual inspections. Underwater drones enable port authorities and border security personnel to inspect the hulls of passing vessels. These underwater drones or ROVs eliminate the need for a diver to be sent underwater, and vessels are not forced to incur costly delays while drydocking. The hull markings, rudders, sacrificial anodes, and propellers are all photographed by the ROV camera.  Drone use will only grow as technology advances, with features such as detailed 3D models of interior assets and more advanced automation on the horizon. Drones are a critical time-saving and cost-effective tool for the maritime industry, with applications in the air, confined spaces, and underwater. When compared to dive teams and work class ROVs, our clients have saved up to 60% on costs. Our micro/mini ROV is an unmanned underwater drone capable of performing visual underwater inspections at depths of up to 150 meters. The micro ROV is controlled by a hand console from a research vessel or quay. A secondary screen displays the results of the operations. Our reporting software provides the client with a comprehensive survey record. To discuss any of the concepts described here in more detail, our friendly and experienced customer service team can help. We offer tried and tested services around Houston, Texas and Longbeach, California. Call American Tanks at +1 800 656 0167 Or email at info@amtanks.com

Each part of a tank system, from its gauges and valves to its vents and drains, is essential to its continued functionality, safety, and efficiency. Because these individual parts bear crucial functions to ensure your tank’s continued smooth operation, whether for commercial, industrial, or household usage, it therefore, needs to be inspected regularly.  Is the term “tank appurtenance” completely new to you? Have you figured out what it does to your tank and why it’s so important to its longevity? Learn everything you need to know about the topic from this post. What Are Storage Tank Appurtenances? Appurtenances to a storage tank include all the parts and pieces that are either directly attached to or located nearby. All aspects of the tank system would be compromised without them. These are some of the most typical accessories for tanks:     The Importance of Inspecting Tank Appurtenances The inspection of attachments is a crucial feature of construction and maintenance since it helps to ensure the safety and dependability of the structure and its components. A building’s appurtenances include its staircases, railings, elevators, fire alarms, plumbing fittings, and electrical systems. These components are essential to the general function and safety of the structure, and it is essential to evaluate and rectify any possible problems before they become hazardous or prevent water tank damage. Tank inspections aid in detecting and preventing problems such as corrosion, wear and tear, and damage from natural forces such as weather and aging. In addition to identifying code breaches and ensuring the facility meets current safety standards, routine inspections assist in identifying code problems. This reduces the danger of harm or death to building inhabitants and the chance of property damage. Top Benefits Of Regular Tank Appurtenances Inspection Inspection of building components offers various advantages, including the following: Signs That Your Tank Appurtenances Is Damaged You can easily determine if your tank appurtenances are damaged if you look for these signs: Need A Professional Inspection Team For Your Tank Appurtenances? American Tanks is the right inspection service team for your water tank appurtenances! We can inspect your commercial and industrial water or chemical storage tank appurtenances thoroughly in accordance with all applicable regulations, guaranteeing the safety and integrity of your tanks throughout.  Call us today at +1 800 656 0167 to learn more about our other services!

Ever heard stories about people whose water tanks split and collapsed because they failed to prepare their base properly? Imagine how heavy a water tank that is filled to the maximum with water, say 1,000 liters, and if you’re water tank foundation isn’t placed, for instance, on a very solid, even, and leveled surface, it will surely crack and topple over. The purpose of a water tank foundation is to support the weight of water storage containers while also containing spillage. The tank bottom needs complete support, which can only come from a foundation, so engineers must ensure the water tank foundation design can support the tank and its weight. So take your time, and ensure that the foundation for your water tank is well-constructed and maintained by specialists. Never settle for low-quality materials or attempt a DIY project if you are inexperienced in this field. Storage Tank Foundation Inspection and Maintenance The first phase in any building project is laying the foundation, which is crucial to the building’s stability. It is precisely the same as any other storage tank; the integrity and dependability of the entire tank rest with the foundation. And so, what can you do to ensure that your tank’s foundation is reliably strong and stable? The answer is quite simple: you must follow regular maintenance and inspections. There are, indeed, countless benefits of regular tank inspections and maintenance on your water tanks! They surely do not miss any of these crucial details: 1. A proper assessment of the tank foundations prevents uneven settlement. Inspections aim to minimize corrosion risks around any part of the foundation-supported tank.  2. Damaged areas can be detected early. Weather changes or extreme seasonal changes significantly affect the tank’s foundation. Regular monitoring helps quick repairs, avoiding more significant issues from occurring.  3. Regular inspection and maintenance comply with the latest federal regulations. Part of their regulations is to check if a qualified cathodic protection tester has tested your system. According to the Environmental Protection Agency, it has to be done within six months of installation and at least every three years.  4. Proper and regular inspection helps develop a pattern. A periodic inspection of the foundation can aid in finding solutions to maintenance issues such as wear and tear, wash-out, settlement, leaks, or other conditions that might have changed. 5. Avoids catastrophic failures. The latest leak detection techniques used by water tank companies minimize catastrophic failures while promoting lower operational costs and extending the life of industrial storage tanks. How to Choose the Best System for Water Storage Tank Foundation The tank foundation is the base that supports the weight of the stored water. Therefore, its type, design, and system should accurately coincide with the style and capacity of the water tank. Furthermore, because the primary goal of a foundation is to offer safety and security for the entire tank, it must be designed and constructed by licensed tank specialists! As a wise owner, take note of these tips: 1. Always choose the best site!  Geologic testing and research are needed to determine the soil’s composition and whether it is prone to seismic activity. The test can establish if the soil includes potentially harmful materials such as peat, soft clay, loose silt, or fine sand. It is also possible to assess whether the site has “leftovers” from former use, such as filled-in basements, underground storage tanks, underground bomb shelters, etc. 2. Piling is an option when soil conditions are deplorable.  If surface reservoir sites are impossible to relocate, pile drilling is the key! It involves drilling holes or driving posts into a concrete, steel, or stone foundation. These underground struts provide additional support to the tank to prevent extreme and uneven settlement. 3. Concrete foundations are built to endure natural phenomena.  Seismic areas or earthquake zones often require concrete footings to help anchor the tank to the foundation to prevent large movements.     4. Always consider the superior tank-type  There are many types of storage tanks out there! But It is no doubt that stainless steel tanks are the most trendy. Aside from being aesthetically pleasing, its durability and service have been proven! It may be a little expensive, but the maintenance cost is way less!  5. Hire the best tank service provider in your area!  Trust the licensed company, engineers, and geoscience experts to get the hard facts on the best foundation for your future storage. Make sure they keep up with innovations, follow the standards, and adhere to local laws.  Is Your Water Tank Foundation In Need of Professional Maintenance? A solid foundation of your tank manifests that your tank is ready for any circumstances. It should be able to carry the weight and the maximum stored content and must endure the extreme climate and weather. At American Tanks, we can expertly install, inspect, and maintain your water tank foundation, no matter its size and location. Call us today at +1 800 656 0167 to schedule an appointment or to get a customized quote for your needed services.

Have you ever taken a sip of water from the tap and thought to yourself, “Where did this water come from?” You’ve probably guessed a water tank, and it’s crucial to understand the role of organizations like OSHA and EPA in ensuring the safety of the water you and your family drink daily. These organizations put regulations in place to guarantee that water tanks are regularly inspected and maintained to prevent the contamination of our water supply. In this blog, we’ll dive into the important work of OSHA and EPA and explore how their regulations play a crucial role in keeping our water clean and safe. So, whether you’re a concerned citizen, a water tank operator, or just curious about the process, continue reading to learn the role these organizations play in ensuring the safety of water tanks. What are OSHA and EPA Regulations? OSHA and EPA are different agencies under the U.S. Government. OSHA, shortened for Occupational Safety and Health Administration, is under the U.S. Department of Labor, while EPA stands for Environmental Protection Agency of the U.S. Government. Occupational Safety and Health Administration (OSHA) manages workplace safety, and the Environmental Protection Agency (EPA) sets rules to limit environmental pollution. The EPA and OSHA are mandated by law to protect the public’s health and safety and America’s labor force through the timely and effective implementation of several federal laws and applicable regulations. In some aspects, the responsibilities of the agencies are separate and distinct, while in others, they are complementary. These two agencies aim to improve the protection of workers, the public, and the environment at facilities under EPA and OSHA jurisdiction.  EPA Scope, Responsibilities, and Regulations The responsibilities of this organization include protecting public health and the environment by guaranteeing compliance with federal environmental statutes and regulations. EPA Clean Water Act regulations and EPA Drinking Water regulations are two of the many statutes and regulations by the EPA. What does the EPA regulate?  It regulates and ensures that potable water is readily available to everyone. Whether the source is public water system or water tanks, EPA assures that every person is drinking safe and clean water. EPA regulations guarantee that once a water storage tank has passed on the tests conducted by EPA and its affiliate agencies, it is safe from all possible contaminants, such as microbiological, chemical, or physical contaminants. OSHA Scope, Responsibilities, and Regulations It is the agency’s duty to enforce the OSHA Safety Act to ensure, to the greatest extent possible, safe and healthy working conditions for all workers. OSHA has a program for both public and private sectors called OSHA Safety and Health Fundamentals Certificate Program to promote occupational safety and health and reduce worker incident rates. What does the OSHA regulate?  It regulates and ensures that the general working conditions are met. OSHA requirements include that the employer provides potable drinking water in adequate amounts to meet each employee’s health and personal needs. The workplace must have a potable water fountain, a covered container with single-use drinking cups stored in a sanitary receptacle, or single-use bottles. Also, OSHA provides specific requirements for water storage tanks constructed in confined spaces and protects construction workers from exposure to the elements when constructing a water tank. Importance of Water Tank Inspections As Per EPA and OSHA Regulations Water tanks are an indispensable part of our daily lives. They store water for various purposes, such as drinking, washing, and industrial processes. However, it is important to ensure that water tanks are safe and free from contaminants. That’s why regular inspections of water tanks are so important and why they are mandated by organizations like the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA). These organizations have established guidelines for the design, construction, and maintenance of water tanks, and regular inspections help to ensure that these guidelines are being followed. By adhering to these regulations, your organization can minimize the risk of water tank contamination and ensure that the water you are storing is safe for consumption. Get Premium-Grade Water Storage Tanks Only At American Tanks! The regulations set by the two agencies, EPA and OSHA, are critical in ensuring water tank safety because compliance with their regulations can help you identify any necessary repairs or upgrades.  If you do not yet have your own water tank or need an experienced team of water tank inspection and maintenance for your existing tanks, there’s only one company in the US that can offer you the best services – American Tanks! Dial +1 800 656 0167 or email us at info@amtanks.com to discover our complete range of services!